help me with the configuration of the wheels and steerin

pls help me with the configuration of the wheels and steering

susp_front
{
y=0.04
z=1.40
restlen=0.411 ;293 395kg
minlen=0.22
maxlen=0.46
k=43781.6943144 ;@ static load and 1.316 NF SR
bump_rate=4600 ;0.7 1944
rebound_rate=4600 ;0.7 6531
bump_function=0
rebound_function=0
anti_pitch=0.1
camber_change_per_m=0.067
roll_center
{
x=0
y=-0.400 ;60mm
z=0
}
}

susp_rear
{
y=0.04
z=-1.155
restlen=0.370 ;305 275kg
minlen=0.2
maxlen=0.43
k=43781.6943144 ;@ static load and 1.502 NF SR
bump_rate=4600 ;0.75 1852
rebound_rate=4200 ;0.8 5191
bump_function=0
rebound_function=0
anti_pitch=0.1
camber_change_per_m=0.14
roll_center
{
x=0
y=-0.552 ;60mm
z=0
}
}

susp0~susp_front
{
x=0.70
camber_change_steering=0.147 ;0.25 rad ~ 14.5 degree camber with 1 radian rotation of steering @ 8 degree caster
caster_offset=-0.0235 ;8 degrees static caster -0.0235
toe_change_per_m=0
}aq
susp1~susp_front
{
x=-0.70
camber_change_steering=-0.147 ;0.25 rad ~ 14.5 degree camber with 1 radian rotation of steering @ 8 degree caster
caster_offset=-0.0235 ;5.78 degrees static caster -0.0235
toe_change_per_m=0
}

the car is a fiat brava and I have to lower the steering wheel as you do?

prntscr.com/7v10bu
and steering wheel is same as Suspension but X is left or right

how did they realize that they had to go so without even seeing the car?
PRIBAN I AM MERCEDES91407 ON YOUTUBE YOU REMEMBER OF ME?

Fiat Brava has a 2,54 wheelbase, so:

susp_front
{
y=0.04
z=1.3925
;;;

susp_rear
{
y=0.04
z=-1.1475
;;;


And 1,439 front track and 1,441 rear track

so:
susp0~susp_front
{
x=0.7195
;;;
susp1~susp_front
{
x=-0.7195
;;;

susp2~susp_front
{
x=0.7205
;;;
susp3~susp_front
{
x=-0.7205
;;;

In my opinion model should fit real size of the vehicle.

Fiat Brava MK I has independent suspensions at the rear axis and MacPherson at the front, so check "camber_change_per_m" geometry. I'm not sure that "camber_change_per_m" you set is correct.

Check here: www.autozine.org/technical_school/suspen...tech_suspension2.htm

If you not see the car in the game, check your Car.ini in the "Body" check model=???.dof and check model_incar=???.dof

Priban escribió: If you not see the car in the game, check your Car.ini in the "Body" check model=???.dof and check model_incar=???.dof

car not good not good you code

I don ´t undestarnd you :/

ehi daniele,,,hai nella cartella del auto il file car.shd? quella ti fa vedere le texturi dell'auto...
se ancora nn vedi l'auto prova a texturarlo l'auto ma tutto in modo "unused",,solo i vetri dell'auto in "glowing" ok,,,sn sicuro che la vedrai poi,,,anch'io ho avvuto questo problema,,,,spero che vada bene

priban,,don't worry,,i wrote in italian to daniele because he is italian,,so i think he'll understand better