Help me!

Más
17 Jun 2016 16:46 #1952 por Stefan Jovanovic
Help me! Publicado por Stefan Jovanovic
First, I wanna say hello to everyone here. I'm new guy into this sim, and I like the game alot. Damn, why I am not some multimilioner guy to donate those devs to make such a beautiful and realistic sim :( But nevermind that, I need your help guys.

I wanna play sim with my friend, just to cruise with him on Polish Roads. And, we join in the same network in hamachi, which I was created, and I give him my ipv4 address, which is required to connect to me. Then, I just go to "Host Multiplayer Network", and then I'm spawned at that gas station there, at the start. But, in chat console that is showed few seconds on the start says that I'm the 'localhost 127.0.0.1' <---- why it is 127.0.0.1? My friend cannot connect, says that server cannot be found on ipv4 address. I have edited 'racer.ini' file, there was ip address "127" which I have edited and changed to 25.120.244.160, which is ipv4 address from hamachi. But when I enter the game after that, again, 172 is presented.
Can you somehow help me? BTW, our version is v0.65 beta 5, which is most stable version for me.
Más
17 Jun 2016 17:24 - 17 Jun 2016 17:27 #1953 por Miguel1.8T
Respuesta de Miguel1.8T sobre el tema Help me!

Stefan Jovanovic escribió: First, I wanna say hello to everyone here. I'm new guy into this sim, and I like the game alot. Damn, why I am not some multimilioner guy to donate those devs to make such a beautiful and realistic sim :( But nevermind that, I need your help guys.

I wanna play sim with my friend, just to cruise with him on Polish Roads. And, we join in the same network in hamachi, which I was created, and I give him my ipv4 address, which is required to connect to me. Then, I just go to "Host Multiplayer Network", and then I'm spawned at that gas station there, at the start. But, in chat console that is showed few seconds on the start says that I'm the 'localhost 127.0.0.1' <---- why it is 127.0.0.1? My friend cannot connect, says that server cannot be found on ipv4 address. I have edited 'racer.ini' file, there was ip address "127" which I have edited and changed to 25.120.244.160, which is ipv4 address from hamachi. But when I enter the game after that, again, 172 is presented.
Can you somehow help me? BTW, our version is v0.65 beta 5, which is most stable version for me.


Hi, Stefan
To play with your friend you have to follow this :
1.You create a local server
2.Then you have to go to your internet configuration in your PC
3.Find the settings in connected dispositives
4.Look for a server without name that is a ''local server''
5.Copy the IP
6.Send to your friend

:) If you have questions don't doubt ask me

I think 127.0.0.1 is the default code or the game code (I don't know) because when I am going to write the code in the text bank appears that number

All type of cars: Sedan,Coupe,Combi,Vans,Diesel,Petrol,Automatic,BMW,Ford,Seat,VW,Skoda,Citroen,Renault...
Última Edición: 17 Jun 2016 17:27 por Miguel1.8T.
Más
17 Jun 2016 18:30 #1954 por Stefan Jovanovic
Respuesta de Stefan Jovanovic sobre el tema Help me!
Thank you alot my bro! But wait, we still need to be connected on hamachi?We can get some cruise soon^^
Más
17 Jun 2016 18:36 - 17 Jun 2016 18:36 #1955 por Miguel1.8T
Respuesta de Miguel1.8T sobre el tema Help me!

Stefan Jovanovic escribió: Thank you alot my bro! But wait, we still need to be connected on hamachi?We can get some cruise soon^^


I don't know, only you have to write the server code of the hoster

I don't have hamachi :)

but i think that not have to be connected

All type of cars: Sedan,Coupe,Combi,Vans,Diesel,Petrol,Automatic,BMW,Ford,Seat,VW,Skoda,Citroen,Renault...
Última Edición: 17 Jun 2016 18:36 por Miguel1.8T.
Más
17 Jun 2016 18:52 #1956 por Stefan Jovanovic
Respuesta de Stefan Jovanovic sobre el tema Help me!
Thanks again, when I get home I will try it :-) And, why when I install RC10 version textures are all missing and cannot be loaded? Even sound is out.
Más
17 Jun 2016 18:55 #1957 por Miguel1.8T
Respuesta de Miguel1.8T sobre el tema Help me!

Stefan Jovanovic escribió: Thanks again, when I get home I will try it :-) And, why when I install RC10 version textures are all missing and cannot be loaded? Even sound is out.


I don't know :) but if this can help you, go to racer.ini and search configuration
What are the specs of your PC?

Even RC10 needs good PCs

All type of cars: Sedan,Coupe,Combi,Vans,Diesel,Petrol,Automatic,BMW,Ford,Seat,VW,Skoda,Citroen,Renault...
Más
17 Jun 2016 19:07 #1958 por Stefan Jovanovic
Respuesta de Stefan Jovanovic sobre el tema Help me!
4GB DDR2 800MHz
AMD Athlon 7750 BE 2.7 GHz
AMD Radeon HD 7750 1GB DDR5 128bit
320GB HDD SATA

That's my config. I can post a pic in about 10-15 mins how it looks and my QLog :-))
Más
17 Jun 2016 19:09 #1959 por Miguel1.8T
Respuesta de Miguel1.8T sobre el tema Help me!

Stefan Jovanovic escribió: 4GB DDR2 800MHz
AMD Athlon 7750 BE 2.7 GHz
AMD Radeon HD 7750 1GB DDR5 128bit
320GB HDD SATA

That's my config. I can post a pic in about 10-15 mins how it looks and my QLog :-))


It's ok for RC10 ;) post pics please

All type of cars: Sedan,Coupe,Combi,Vans,Diesel,Petrol,Automatic,BMW,Ford,Seat,VW,Skoda,Citroen,Renault...
Más
17 Jun 2016 19:27 #1960 por Stefan Jovanovic
Respuesta de Stefan Jovanovic sobre el tema Help me!
Here is it. I don't know what is wrong with it. And here is QLOG.

Fri Jun 17 19:24:18 (INFO ): [-] --- application start ---
Fri Jun 17 19:24:18 (INFO ): [-] Process Panthera created. [pm\process.cpp:31 / PM::Process::Process]
Fri Jun 17 19:24:18 (INFO ): [panthera] Panthera version 0.9.0 RC10: $Revision: 5586 $ (Aug 22 2014/15:46:05) - customer: Internet (32-bits) [main.cpp:394 / main]
Fri Jun 17 19:24:18 (INFO ): [panthera] Hostname 'STIFLEROGHD-PC', IP 192.168.1.19, directory 'C:\Users\StifleroGHD\Desktop\racer090rc10\racer' [main.cpp:400 / main]
Fri Jun 17 19:24:18 (INFO ): [panthera] QXWindow: Set fullscreen mode to 1360x768x32@60 [qxwindow.cpp:644 / QXWindow::SwitchToFullScreen]
Fri Jun 17 19:24:19 (INFO ): [panthera] Pixfmt 8: 24 color bits, 0 depthbuffer bits, 0 stencil bits, 0 alpha, stereo: 0. [qxwindow.cpp:467 / EnableOpenGL]
Fri Jun 17 19:24:19 (ERR ): [panthera] wglGetProcAddress(glProgramVertexLimitNV) failed [ERR,gllextmgr.cpp:168,check_wglGetProcAddress]
Fri Jun 17 19:24:19 (INFO ): [panthera] Render engine using Cg (4.50) [dgpushader.cpp:48 / DGPUShaderManager::DGPUShaderManager]
Fri Jun 17 19:24:19 (INFO ): [panthera] CG profiles: vertex=arbvp1, fragment=arbfp1, geometry=unknown [dgpushader.cpp:138 / DGPUShaderManager::Init]
Fri Jun 17 19:24:19 (WARN ): [panthera] DGPUShaderManager::Init() Geometry shading is not supported on this card (ATI/Intel?). [WARN,dgpushader.cpp:141,DGPUShaderManager::Init]
Fri Jun 17 19:24:20 (WARN ): [panthera] DGPUShader:Load(data/renderer/shaders/dyn_standard_v.cg): The profile is not supported. [WARN,qerror.cpp:35,QShowCGErrors]
Fri Jun 17 19:24:20 (INFO ): [panthera] WorldRenderer: you have an ATI graphics card (ATI Technologies Inc.). Working around some long-term bugs. [renderer.cpp:749 / WorldRenderer::LoadSettings]
Fri Jun 17 19:24:20 (WARN ): [panthera] envmap.generate_mipmaps is 1 but ATI drivers don't support texCUBElod for mipmapped envmaps in Cg [WARN,rmanager.cpp:1190,RManager::CreateSceneGraph]
Fri Jun 17 19:24:20 (INFO ): [panthera] Creating UDP binding: udp,26000,127.0.0.1:26000 [pm\bindingudp.cpp:49 / PM::BindingUdp::DoConnect]
Fri Jun 17 19:24:20 (INFO ): [panthera] Creating binding udp: udp,127.0.0.1:26002,127.0.0.1:0 [pm\bindingudp.cpp:20 / PM::BindingUdp::DoCreate]
Fri Jun 17 19:24:20 (INFO ): [panthera] Socket[control_mt]: Created binding 0 for identifier udp,127.0.0.1:26002,127.0.0.1:0 [pm\socket.cpp:41 / PM::SocketBase::CreateBinding]
Fri Jun 17 19:24:20 (INFO ): [panthera] Socket[control]: Created binding 1 for identifier udp_reliable,26001 [pm\socket.cpp:41 / PM::SocketBase::CreateBinding]
Fri Jun 17 19:24:20 (INFO ): [panthera] Graphics card has support for 0 groups, 0 barriers [dframelock.cpp:379 / DFrameLock::GetFunctions]
Fri Jun 17 19:24:20 (INFO ): [panthera] vsync was set to 0 (verifying that it now is 0) [dframelock.cpp:180 / DFrameLock::SetVSync]
Fri Jun 17 19:24:20 (INFO ): [panthera] Physics engine: NEWTON v3.10, architecture 0 [rmanager.cpp:1735 / RManager::Create]
Fri Jun 17 19:24:20 (INFO ): [panthera] Newton (v3) platform 0: cpu [newton.cpp:137 / PNewtonWorld::PNewtonWorld]
Fri Jun 17 19:24:20 (INFO ): [panthera] FMOD: modified software format: rate=44100, fmt=2, outChannels=2, inChannels=6, resampler=3, bits=16 [qsample.cpp:1328 / QSampleCreateSystem]
Fri Jun 17 19:24:20 (INFO ): [panthera] FMOD blocksize: 11.61 ms, total buffer 92.88 ms, avg latency 75.46 ms [qsample.cpp:1379 / QSampleCreateSystem]
Fri Jun 17 19:24:21 (INFO ): [panthera] Controls: main control file is 'profile1.ini' [rcontrolengine.cpp:866 / RControllerEngine::OpenConfig]
Fri Jun 17 19:24:21 (INFO ): [panthera] Safety changed to: SAFE [rcontrolengine.cpp:474 / RControllerEngine::StepInput]
Fri Jun 17 19:25:25 (INFO ): [panthera] Loading track 'carlswood_nt' [rtrack.cpp:1348 / RTrack::Load]
Fri Jun 17 19:25:33 (INFO ): [panthera] QNClient:Connect() attempt to localhost:25000 (RMultiplayer) [client.cpp:230 / QNClient::Connect]
Fri Jun 17 19:25:33 (INFO ): [panthera] QNClient: connected to server (our clientID=71, client name 'RMultiplayer') [client.cpp:606 / QNClient::Poll]
Fri Jun 17 19:25:33 (INFO ): [panthera] InNewCar: owner 71, car 'lamborghini_murcielago', gridPos 0 (drv The_Driver) [rmessage.cpp:724 / RMessage::InNewCar]
Fri Jun 17 19:25:33 (INFO ): [panthera] Loading car 'lamborghini_murcielago' [rcar.cpp:1122 / RCar::Load]
Fri Jun 17 19:25:36 (WARN ): [panthera] dbg_controls.steer value '0.05' (in racer.ini) is not a valid integer: a '.' is not allowed (floating point) [WARN,qinfo.cpp:1165,QInfo::GetInt]
Fri Jun 17 19:25:37 (WARN ): [panthera] dbg_controls.brakes value '0.0' (in racer.ini) is not a valid integer: a '.' is not allowed (floating point) [WARN,qinfo.cpp:1165,QInfo::GetInt]
Fri Jun 17 19:25:37 (INFO ): [panthera] Loading car 'lamborghini_murcielago' [rcar.cpp:1122 / RCar::Load]
Fri Jun 17 19:25:37 (WARN ): [panthera] dbg_controls.steer value '0.05' (in racer.ini) is not a valid integer: a '.' is not allowed (floating point) [WARN,qinfo.cpp:1165,QInfo::GetInt]
Fri Jun 17 19:25:37 (WARN ): [panthera] dbg_controls.brakes value '0.0' (in racer.ini) is not a valid integer: a '.' is not allowed (floating point) [WARN,qinfo.cpp:1165,QInfo::GetInt]
Fri Jun 17 19:25:54 (INFO ): [panthera] WorldRenderer: you have an ATI graphics card (ATI Technologies Inc.). Working around some long-term bugs. [renderer.cpp:749 / WorldRenderer::LoadSettings]
Fri Jun 17 19:25:54 (WARN ): [panthera] envmap.generate_mipmaps is 1 but ATI drivers don't support texCUBElod for mipmapped envmaps in Cg [WARN,rmanager.cpp:1190,RManager::CreateSceneGraph]
Fri Jun 17 19:25:54 (INFO ): [panthera] Graphics card has support for 0 groups, 0 barriers [dframelock.cpp:379 / DFrameLock::GetFunctions]
Fri Jun 17 19:25:54 (INFO ): [panthera] vsync was set to 0 (verifying that it now is 0) [dframelock.cpp:180 / DFrameLock::SetVSync]
Fri Jun 17 19:25:54 (INFO ): [panthera] Physics engine: NEWTON v3.10, architecture 0 [rmanager.cpp:1735 / RManager::Create]
Fri Jun 17 19:25:54 (INFO ): [panthera] Newton (v3) platform 0: cpu [newton.cpp:137 / PNewtonWorld::PNewtonWorld]
Fri Jun 17 19:25:55 (INFO ): [panthera] Controls: main control file is 'profile1.ini' [rcontrolengine.cpp:866 / RControllerEngine::OpenConfig]
Fri Jun 17 19:25:55 (INFO ): [panthera] Safety changed to: SAFE [rcontrolengine.cpp:474 / RControllerEngine::StepInput]
Más
17 Jun 2016 19:29 #1961 por Stefan Jovanovic
Respuesta de Stefan Jovanovic sobre el tema Help me!
Tiempo de carga de la página: 0.302 segundos
Gracias a Foro Kunena