README      ~Harey 2013~
----------------------------------
1928 Bentley 4.5l Blower

Converted from Google 3D Warehouse, originally by: PAV

Credits;
Originally by PAV, converted by Harey, gauges by Silver (mostly), car.ini/torque curve all updated by Cosmo

Install;
Winrar is suggested. If you are using Winrar or similar just drag and drop the main folder (bentley_blower) into the cars folder. If you are using Winzip, create a folder named "bentley_blower" and drag and drop contents of zip into folder, then move all *.crv files to a new folder named "crv" in the "bentley_blower" folder.

What are you getting?;
This is the best representation I could make with the materials out there of a Bentley 4.5l Blower. Which is a supercharged 4 cylinder, connected to the rear wheels by a 4 speed manual transmission (Which was optional, also could have a 3 speed manual). The engine redlines at about 4000rpm, and makes 400NM @ 2000rpm, and 175HP @ 3500 rpm. It also has a 115 Liter petrol tank hanging out behind the rear wheels. The gauges on the dash from left to right are the clock (works on lap time), speedo, oil pressure, rpm, supercharger pressure, fuel, and water temperature.The vehicle does have particles for the exhaust, and lights (no brake lights, not sure if they had them though).

Other Notes;
While this vehicle was converted from Google 3d Warehouse, I strived for near perfection in the model remodeling some pieces of it, and retexturing others. Also there is a 2nd torque curve in the crv folder, the base one is the touring which tops at about 400Nm, and the racing curve that tops at 600Nm. The clutch is already setup to use either torque curve so all you have to do is swap the names in the car.ini (engine_torque_racing.crv is commented into the car.ini).

Known Issues;
The brakes may also be a little over powered. There is also no non-CG shader currently There maybe other small issues that I can't think of at the time of writing this readme.

Contact;
If you need to contact me about this vehicle for some reason email me at harey89@hotmail.com and title your subject as "Bentley Blower".