Messages for Fabikan75

Más
01 Ene 2016 18:06 #1623 por Priban
Respuesta de Priban sobre el tema Messages for Fabikan75
I have it:
prntscr.com/9kxlg0
prntscr.com/9kxlno
Thank you
Más
02 Ene 2016 01:48 #1625 por Skybh
Respuesta de Skybh sobre el tema Messages for Fabikan75

Priban escribió: I have problerm with this:
Torque of engine: prntscr.com/9kwoj0
Torque in game: prntscr.com/9kwore

Is it right ? Because car accelerating is faster than 19.9s


Don't care about 0-100 time ;)
For accurate specs, always take elasticity measurements, be sure everything is ok (wheel radius that should follow rear car tire size, accurate masse and accurate aero) then you can look about your specs



For the torque curve, best values to take are :
Max power (the best is kW, but bhp/hp etc is ok too) and max torque (the best for me is m/kg)

So let's start,
The car has 72kW at 5200rpm, we need to convert that in newton, to convert :
Nm = ((72/0.736)*RPM(here 5200)/0.736)*5252
here it gives ~139,6Nm, lets say 140Nm
So we have our first point to place at Y=140 and X = 5200

For the peak torque :
The cars got 23.5m/kg at 2500Rpm
So to get it in newton, just make 23.5*9.80665

Now put this point at Y=230 and X=2500

Now we have the 2 basics point, make sure to see power curve, so make view/toggle normalised horsepower display
A grey curve should appear, now place other points and make sur before 5200 you don't have greather power.. I've tried , the curve should have a weird shape lol
For other point, the curve should start at X=0 and Y=0 and stop at X=? and Y=0
In our exemple we can make our engine stop running at 7000rpm
Más
02 Ene 2016 10:49 #1626 por Priban
Respuesta de Priban sobre el tema Messages for Fabikan75
Wow, thanks ! i will try it
Más
02 Ene 2016 14:25 #1627 por Fabikan75
Respuesta de Fabikan75 sobre el tema Messages for Fabikan75

Don't care about 0-100 time ;)
For accurate specs, always take elasticity measurements, be sure everything is ok (wheel radius that should follow rear car tire size, accurate masse and accurate aero) then you can look about your specs

In my opinion, acceleration from 0-100 is far more important than the exact torque curve and aero . These parameters can only see the file and the acceleration of the game. Do you prefer to watch files or play?
Más
02 Ene 2016 17:53 - 02 Ene 2016 17:55 #1631 por Skybh
Respuesta de Skybh sobre el tema Messages for Fabikan75

Fabikan75 escribió:

Don't care about 0-100 time ;)
For accurate specs, always take elasticity measurements, be sure everything is ok (wheel radius that should follow rear car tire size, accurate masse and accurate aero) then you can look about your specs

In my opinion, acceleration from 0-100 is far more important than the exact torque curve and aero . These parameters can only see the file and the acceleration of the game. Do you prefer to watch files or play?

I did not say to don't care about an 40% acceleration error, no.
But for 0-100 time, how is it done (when the pilot change gears?how time to..) It is not easy to make the "closer" test..
When I speak about aero , i mean correct Cx and frontal aera (could be hard to find, yes), but with the SCx and Cx you can know the area :)

For the funny fact :
I am working on a car :
Top speed : ~175km/h, i've got elasticity time.
0-100 in real : 15s
In game, i've got correct top speed, aero, wheel,elasticity and mass but not the right 0-100 time
(depend on how i change gear, but between 13,8 and 14,4 sec..) :D
Última Edición: 02 Ene 2016 17:55 por Skybh.
Más
03 Ene 2016 10:27 - 03 Ene 2016 10:28 #1632 por Fabikan75
Respuesta de Fabikan75 sobre el tema Messages for Fabikan75
I measure acceleration on the straight Path using the key "p" and the clutch . I am changing gears differently . Once high , sometimes low. And I measure my best time . Margin of error is + \ - 0.3s . Vmax now easier to set the gearbox. In this case, a + \ - 3km / h.
Manipulating CRV , gearbox, aero . :cheer:
After all, here we respect your knowledge Skybh :)
Última Edición: 03 Ene 2016 10:28 por Fabikan75.
Tiempo de carga de la página: 0.294 segundos
Gracias a Foro Kunena